Thermal stability of C/Mullite composites in different environments

In the present study, the mechanical properties and microstructure of C/Mullite composites with a PyC-SiC double-layer interfacial coating after annealing were systematically studied to evaluate the evolution of thermal stability in an inert atmosphere and a vacuum. The C/Mullite composites annealed in the inert atmosphere exhibited better thermal stability than those annealed under the vacuum. The main factor for failure of the composites was carbothermal reduction. The activation temperature of carbothermal reduction in composites in the inert atmosphere was ～100 °C higher than that in the vacuum. Once carbothermal reduction was activated, the microstructure of composites was destroyed, resulting in a significant weight loss and mechanical property degeneration. The degeneration of mechanical properties was unrecoverable.     

Unique CNTs-chained Li4Ti5O12 nanoparticles as excellent high rate anode materials for Li-ion capacitors

Composite anode materials with a unique architecture of carbon nanotubes (CNTs)-chained spinel lithium titanate (Li₄Ti₅O₁₂, LTO) nanoparticles are prepared for lithium ion capacitors (LICs). The CNTs networks derived from commercial conductive slurry not only bring out a steric hindrance effect to restrict the growth of Li₄Ti₅O₁₂ particles but greatly enhance the electronic conductivity of the CNTs/LTO composites, both have contributed to the excellent rate capability and cycle stability. The capacity retention at 30 C (1 C = 175 mA g^?1) is as high as 89.7% of that at 0.2 C with a CNTs content of 11 wt%. Meanwhile, there is not any capacity degradation after 500 cycles at 5 C. The LIC assembled with activated carbon (AC) cathode and such a CNTs/LTO composite anode displays excellent energy storage properties, including a high energy density of 35 Wh kg^?1 at 7434 W kg^?1, and a high capacity retention of 87.8% after 2200 cycles at 1 A g^?1. These electrochemical performances outperform the reported data achieved on other LTO anode-based LICs. Considering the facile and scalable preparation process proposed herein, the CNTs/LTO composites can be very potential anode materials for hybrid capacitors towards high power-energy outputs.     

Raman and X-ray photoelectron spectroscopy study on the influence of La2O3 on the melt structure of SiO2–CaO–Al2O3–MgO

In order to gain more insights into the influence of rare earth elements on the melt structure of SiO₂–CaO–Al₂O₃–MgO glass ceramics, Raman and X-ray photoelectron spectroscopy techniques were used to study the influence of La₂O₃ on the Si–O/Al–O tetrahedron structure within SiO₂–CaO–Al₂O₃–MgO–quenched glass samples in this study. Results showed that some Raman peak shapes at low frequencies (200–840 cm^?1) changed significantly after the addition of La₂O₃, compared to the high frequency (840–1200 cm^?1) region that corresponds to the [SiO₄] structure, suggesting that the depolymerization of the low-frequency T–O–T (T=Si or Al) structure was more prevalent with La³⁺ addition. Besides, the depolymerization extent of the Si–O/Al–O tetrahedral network varied when the melt composition altered. Most notably, depolymerization is the most significant at a low CaO/SiO₂ ratio (0.25) and a high Al₂O₃ content (8%). Meanwhile, La³⁺ can promote the transformation of Si–O–Si and Al–O–Al bonds to the Si–O–Al ones, thereby forming a complex ionic cluster network interwoven with Si–O and Al–O tetrahedrons.     

Preparation and properties of AZO/PS/AZO tri-layer transparent conductive film with a light-trapping structure

The light-trapping structure is an effective method to increase solar light capture efficiency in the solar cells. In this study, Al-doped ZnO (AZO)/polystyrene (PS)/AZO tri-layer transparent conductive film with light-trapping structure was fabricated by magnetron sputtering and liquid phase methods. The structural, optical and electrical properties of the AZO films could be controlled by different growth conditions. When the sputtering pressure of the under-layer AZO film was 0.2 Pa, the discharge voltage was around 80 V, which was within the optimal process window for obtaining AZO film with high crystallinity. The optimal under-layer AZO film had a large surface roughness and a very low static water contact angle of 75.71°, promoting the relatively uniform distribution of PS spheres. Under this sputtering condition, the prepared AZO/PS/AZO tri-layer film had the highest crystallinity and least point defects. The highest carrier concentration and Hall mobility are 3.0 × 10²¹ cm^-3and 5.39 cm² V^-1 s^-1, respectively. Additionally, a transparent conductive film with the lowest resistivity value (3.88 × 10^-4 Ω cm) and the highest average haze value (26.5%) was obtained by optimizing the process parameters. These properties were comparable to or exceed the reported values of surface-textured SnO₂-based as well as ZnO-based TCOs films, making our films suitable for transparent electrode applications, especially in thin-film solar cells.     

Ablation behavior of thin-blade co-deposited C/Cx-SiCy composites under the influence of the complex fluid conditions of the oxyacetylene torch

This paper offers a new way of testing the ablation property of material under an oxyacetylene torch using a thin-blade specimen, which costs much less time to reach the maximum temperature and provides a harsh turbulence fluid field that's closer to reality. The thin-blade specimen experiences a higher turbulent intensity than the traditional disk-like specimen, leading to more efficient heat exchange. The fluid field simulation agrees with the testing results. In addition, we manage to synthesize the C/Cx-SiCy composites with the co-deposition chemical vapor infiltration (CVI) method. The C/Cx-SiCy composites exhibit a similar anti-ablation property as C/C composites and consist of enough SiC phase simultaneously, combining the advantages of both C/C composites and C/SiC composites. The thin-blade C/Cx-SiCy composites show a lower linear ablation rate (1.6 μm/s) than C/C composites (4.1 μm/s) and C/SiC composites (19.6 μm/s) during the oxyacetylene test. The glass layer formed on the surface of C/Cx-SiCy could cling to the bulk material instead of peeling off due to the high PyC content in the matrix could protect the SiO₂ from blowing away.     

The Impact of the ‘Mis-Peptidome’ on HLA Class I-Mediated Diseases: Contribution of ERAP1 and ERAP2 and Effects on the Immune Response

The strong association with the Major Histocompatibility Complex (MHC) class I genes represents a shared trait for a group of autoimmune/autoinflammatory disorders having in common immunopathogenetic basis as well as clinical features. Accordingly, the main risk factors for Ankylosing Spondylitis (AS), prototype of the Spondyloarthropathies (SpA), the Behçet’s disease (BD), the Psoriasis (Ps) and the Birdshot Chorioretinopathy (BSCR) are HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02, respectively. Despite the strength of the association, the HLA pathogenetic role in these diseases is far from being thoroughly understood. Furthermore, Genome-Wide Association Studies (GWAS) have highlighted other important susceptibility factors such as Endoplasmic Reticulum Aminopeptidase (ERAP) 1 and, less frequently, ERAP2 that refine the peptidome presented by HLA class I molecules to CD8⁺ T cells. Mass spectrometry analysis provided considerable knowledge of HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02 immunopeptidome. However, the combined effect of several ERAP1 and ERAP2 allelic variants could generate an altered pool of peptides accounting for the “mis-immunopeptidome” that ranges from suboptimal to pathogenetic/harmful peptides able to induce non-canonical or autoreactive CD8⁺ T responses, activation of NK cells and/or garbling the classical functions of the HLA class I molecules. This review will focus on this class of epitopes as possible elicitors of atypical/harmful immune responses which can contribute to the pathogenesis of chronic inflammatory diseases.     

Sulfonylguanidine Derivatives as Potential Antimelanoma Agents

Sulfonylguanidines are interesting bioactive compounds with a broad range of applications in the treatment of different pathologies. 2-Aminobenzazole-based structures are well employed in the development of new anticancer drugs. Two series of novel N-benzazol-2-yl-N′-sulfonyl guanidine derivatives were synthesized with the sulfonylguanidine in either an extra- or intracyclic frame. They were evaluated for their antiproliferative activity against malignant melanoma tumor cells, thus allowing structure-activity relationships to be defined. Additionally, NCI-60 screening was performed for the best analogue to study its efficiency against a panel of other cancer cell lines. The stability profile of this promising compound was then validated. During the synthetic process, an unexpected new deamidination of the sulfonylguanidine towards sulfonamide function was also identified.     

粮仓环境监测系统设计

随着科学技术的发展,粮食行业信息化发展得到了强有力的科技支撑。为满足粮库整体信息化建设的要求,打破"信息孤岛"现状,实现资源整合、数据共享,为大数据分析和数据应用提供数据基础,设计一款能够实时采集粮仓内温湿度、氧气、二氧化碳气体浓度、粮堆高度的数据集成系统。系统采用分层分布式结构,由数据集中器和多种传感器模块组成,数据集中器与各传感器模块间通过RS485总线进行数据通讯,并由数据集中器通过网络专线传输汇总的环境监测数据,通过专用软件进行数据处理和挖掘,从而实现粮仓环境监测和预警等功能。     

高效可撤销的身份基在线离线加密方案

身份基加密（IBE）需要提供一种有效的成员撤销机制，然而，现有可撤销成员的IBE方案存在密钥更新和加密运算量过大的问题，可能使执行该操作的设备成为系统的瓶颈。将完全子树方法和在线离线技术相结合，通过修改指数逆类型IBE的密钥生成和加密算法，提出了一种高效可撤销的身份基在线离线加密方案。方案利用完全子树方法生成更新钥，使得撤销用户无法获得更新钥，进而失去解密能力；利用在线离线技术，将大部分加密运算在离线阶段进行预处理，使得在线阶段仅执行少量简单计算即可生成密文。与相关知名方案相比，该方案不仅提高密钥生成中心的密钥更新的效率，而且极大减少了轻量级设备的在线加密工作量，适合于轻量级设备保护用户隐私信息。